How to check what power supply i have PC?

How to check what power supply i have PC?

One of the huge queries we get asked here is how can we know what power supply we get? For many, attempting to clarify the make, version, and wattage of their PSU is particularly problematic. Luckily, we can ask this query a bunch near there and currently the fastest and simple solutions to test what PSU the system is using.

Across the following instructions, we will be clarifying precisely how to test what power supply you get. Solutions can show how to test the power with or without taking off the side panel alongside a host of beneficial tips which can make your following hardware purchase a little informed.

So, with more to complete, let’s waste no time and dip straight into it.

Take off the panel

The initial and particularly simple solution to test what power supply you get is to straightforwardly take the panel off the chassis, and have a look. While that can scare most of the less technically-minded users out there, there is no doubt that is the simple solution to test what PSU you get.

Other side panels are held on with some easy thumb screws, so taking it off is particularly easy. When you are inside the case, all you get to do is glance at the PSU that in other cases, can showcase the producer and PSU’s wattage.

If the PSU of the PC is particularly positioned, you may get to take it out to see the producer’s label. That can request removing cables or unscrewing the PSU from the case’s rear. Fortunately, that is particularly rare, and nine times out of ten, the PSU label can be on display.

Keep in contact with the producer website

This next technique only really operates if the PC was bought like the prebuilt. In this background, the website you purchased the PC from might get a full components list which you could take to discover precisely what PSU you get. Next, the prebuilt PCs specifically come with a components list contained with the doc.

Straightforwardly surfing that might permit you to identify which PSU and wattage the PC has.

Why do you want to test the power supply?

The most crucial time to test what PSU you get is right before an enhancement. The new hardware’s gens (similar gen upgrade) often request a leading amount of extra power to run perfectly. For instance, sticking between the 2080Ti and 3080Ti can particularly request approximately from 50 to 100 extra power wattage.

It is often the case with the hardware upgrade so that you can know what you get to play with (in terms of wattage) is greatly crucial. Why not test out the PSU calculator in which you might calculate precisely how much wattage the new hardware can request.

Knowing the power supply

If truth be told, PSUs might be most of the toughest parts to appropriately know. On the other hand, you might categorize them by wattage, performance, and modularity – to name the most popular. For this reason, selecting the following power supply for the build could be a tricky little prospect.

Luckily, we are there to lend a hand and have highlighted every for your peace of mind.

1. Wattage

The initial and most crucial element you can care about before buying the PSU is the wattage. The PSU’s wattage refers to how much power it might convey to the system. If you do not get sufficient wattage of the PC components, your system straightforwardly will not load. Worse yet, you might particularly ruin most of the hardware by not offering enough wattage.

Everything can influence wattage, such as overclocking, and also water cooling. Fortunately, you might calculate how much power you request using the easy PSU calculator.

2. Efficiency

Next, we have to discuss more about efficiency. If you get some experience with PSUs, you may have realized its efficiency rating – regularly labeled around 80+ bronze, gold, and more. That shows how efficient the PSU is at conveying the wattage between the wall and the PC. Regularly, a lot of low-quality PSUs might grapple to offer high performance at the curve’s top-end.

It is not all though, alongside efficiency, the rating even assists us in knowing how safe or convenient the PSU is. While the opportunities of the PSU bursting into flames is specifically slim, it even does occur – even more so during the PSU brings without efficiency rating whatsoever.

3. Modularity

Lastly, we want to refer to you about modularity. On the other hand, modularity is quite in reference to the physical PSU’s design. While it can not affect the physical sizes, it certainly affects the cables which move to and from the power supply.

When it comes to modularity, PSUs might be split into other clear types such as fully modular, non-modular, semi-modular.

The non-modular is the least desirable of the bunch, coming equipped with the cables which might not be taken out as well. Next, the semi-modular can provide you with a design in which most of the cables might be eliminated. The last one is fully modular which is better and you predicted it – boasts the capability to get all their cables removed.

Closing Ideas

So, there you get it, the next fast guide on how to test what power supply your PC gets. In the other words, the simple solution to discover is by straightforwardly taking the panel off the chassis. However, we know not each of us has this luxury, so great methods are requested.

Keep in mind if you are looking to enhance, or ensure the PSU provides enough power, you have to test the PSU at all. It might save you time, bucks, and even more stress. Finally, you can keep in contact with us if possible. Thank you very much.

Subscribe
Notify of
guest
4 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Alina Tobio
Alina Tobio
1 month ago

Hi! i’d like to ask a question about a problem i’ve run into! i’ve build my very first pc because i’ve always wanted one .
the power supply i have is the be quiet pure power 11 700w with the msi mpg x570 gaming edge wifi motherboard. on the morherboard is shows me a 8 and 4 pin for the cpu power cables. but with my power supply i only got two 4 pins, this is causing my pc to run with no image and a red light at the “CPU” on the motherboard.
the cpu i have is the AMD Ryzen 7 5800x and my graphics card is the MSI geforce rtx 3060 gaming x.

Nick McMullen
Nick McMullen
1 month ago

Hi, I’m super PC novice with a few questions, just wanted to give a forewarning that I’m not completely familiar with all the lingo and information.
So, I was gifted my first gaming PC from a friend and I’ve been trying to play a few games lately but am curious about whether or not my system is running properly or is bottlenecked.
Specs:
MSi B150 motherboard
16 GB DDR4 RAM
i5 6500 CPU
GTX 1060 3GB GPU
500W power supply.
I have tested out a few games and cannot get a reliable 60+ FPS in basically any game. I get close, and sometimes I get above, but I usually hover from 40-50. My GPU also only runs at about 40-50% performance while playing and my CPU at 100% I’ve tried running in various quality levels from in game options and get little to no result. I’ve adjusted the GPU settings for Maximum performance as well as my PC.
Anyone have any idea what could be the issue here or is that normal to expect that kind of performance?
For reference I have observed this in Overwatch, CS:GO, and Apex Legends as just games to test performance.
Any help would be appreciated, thanks in advance!

4
0
Would love your thoughts, please comment.x
()
x
Whalebird
Logo